How To Restore Timberland Boots Color?

Restore Timberland Boots Color

Timberland boots can fade and look worse with time like other leather products.

While some people consider it a sign of wear and tear, others might want to know how to restore Timberland boots’ color to make them look brand new again.

The good news is, you can restore your Timberlands at home instead of spending too much money on the Timberland cleaning service.

This article will give you a step-by-step guidelines to make a second life for your boots.

Can Timberlands Be Restored?

Luckily, you can restore the color of your Timberland boots. There are two ways to renew them: get them repaired in a cobbler for $80 and $150, or repair them at home with DIY methods for a lower cost.

Best Way To Restore Black Timberland Boots: Using The Dry Timberland Cleaning Kit

If your Timberland boots are made of suede leather or nubuck leather, you can use a Timberland Shoe Care Dry Cleaning Kit to make them look new again.

Because this cleaning kit is from the Timberland Company, it can effectively maintain those sensitive boots against the test of time.

In this kit, there is a suede brush, a suede eraser, and a foam cleaner spray. You can get this kit from Timberland’s online store or Amazon.

Dry Timberland Cleaning Kit


  • Old newspaper
  • A soft cotton cloth
  • A microfiber towel

Steps To Restore Timberland Boots

  1. Take the laces off shoes, and put old newspaper on the floor to prevent dirt from touching the floor.
  2. Use a microfiber towel to remove the first layer of dirt and grime on your boots. You can smash your boots if they are seriously caked with layers of mud.
  3. Use the suede brush to remove stubborn stains. To clean the sole, you can use a stiffer brush or an old toothbrush to clean between the lugs.
  4. Take the suede eraser to rub into small stains, scuffs, or marks on the entire of your boots. Rub this rubber eraser around the toe area where there are most scratches and stains.

If you see some random discoloration after using this eraser, don’t worry. They will disappear later.

  1. Wipe off any remaining dirt and mud with a soft brush or cloth.
  2. Open the foam cleaner and spray this product on a soft cloth or a cotton towel. Then, rub this product on the entire boots in a circular motion.

Don’t spot-clean your boots, otherwise, you will end up with splotchy boots.

  1. Use another cloth to wipe off any excess foam, and let your boots air-dry in a well-ventilated area.

Check more: Timberland Wide Vs Medium Differences – Which Size To Choose?

How To Restore Timberland Boots Color Without Kit

If you don’t want to use the Timberland care kit, you can use the following home remedies to clean and restore the color of your boots.

Step 1: Remove Dust And Dirt From Boots

  • For leather boots

You can clean your leather boots with warm water. If your boots are too dirty, you can mix water with baking soda or mild soap for an enhanced cleaning effect.

Cleaning leather boots with water only:

  1. Lightly remove excess mud with a brush.
  2. Soak a soft cloth or sponge in lukewarm water to clean the entire of your boots.
  3. Dry your boots with a towel, then leave your boots air-dry in a ventilated area overnight.

Cleaning leather boots with soap and water (or baking soda with water):

  1. Use a rag to remove dirt.
  2. Apply baking soda or dish soap on the toothbrush.
  3. Apply the toothbrush on your leather boots gently in a circular motion.
  4. Rinse to remove soap/baking soda with clean water.
  5. Use another clean toothbrush with a tiny amount of vinegar to brush the remaining stains.
  • For suede boots

You should be very cautious when cleaning suede boots or nubuck leather boots as these gorgeous shoes are sensitive to cleaning products.

  1. Brush your boots upside down to remove excess dirt and mud.
  2. Use a wire brush to brush down the boots to remove darker marks and small spots. Moving the brush following the fibres of the shoes helps minimize damage to them.

Step 2: Remove Excessive Stains On Boots

  • Water stains

While water stains your Timberlands, you can clean them very easily with the following steps:

  1. Use water at room temperature to dampen the affected area. Use a soft sponge or soft cloth for leather shoes, and a suede brush for suede shoes.
  2. Brush or rub the moisture into the shoe, especially on the watermarks.
  3. After finishing, leave the boots in a well-ventilated area. If your boots are made from suede, you should use old white paper to hold their shape.

Do not use newspaper as the ink from paper pages may fade on the shoes and damage their original color.

  • Salt stains

Vinegar is a ready cheap seasoning for cooking, cleaning your house, and even renewing your leather boots!

  1. Brush off excess salt on your Timberland boots.
  2. Prepare a cleaning mixture of 1 part vinegar with 2 parts clean water. Use a soft cloth to rub this mixture into your boots. Do not use this mixture on your suede boots.
  3. Use another clean cloth to wipe the vinegar residue.
  4. Leave your boots air-dry overnight.
  • Grease stains

Grease stains are among the most daunting stain on your Timberland boots.

  1. If the stain is still new and wet, use absorbent tissue or paper to blot the affected area with care.
  2. Sprinkle an absorbent powder (for example, talcum) on the stained area.
  3. Leave your boots overnight to let the powder absorb the grease stains.
  4. On the next morning, rub off to remove grease stains on your boots. For suede boots, use the Timberland suede brush.

Step 3: Condition Your Boots

Your boots are properly cleaned inside and outside, and all tough stains are removed.

Now, you should condition them and (if possible) create a protective layer on them. This keeps them shining like new and prevents cracks or discoloration.

Frequently conditioning your boots also prolongs their life.


1. How Often Should I Clean And Restore My Timberlands?

You should clean and condition your Timberlands every few months or once per year, depending on how often you wear them.

Every day, you should inspect your boots for all signs of wear and tear and solve the problems as soon as possible.

2. How To Safely Remove Water From My Timberland Boots?

If your Timberland boots get wet, you can let them air-dry thoroughly before cleaning dirt or conditioning them.

Never place them in the dryer, as this could cause damage to the leather surface.

3. Can I Dry My Timberland Boots In The Dryer?

It’s not recommended to dry your Timberland boots in the dryer. Some waterproof leather boots can be damaged by the high heat of a dryer.

If they are wet, stuff them with paper (not newspaper!) and let them air-dry at room temperature.

A blow dryer is a safe alternative to a dryer. It helps remove moisture from the shoes while creating a solid barrier to protect them from water and oil stains.

Final Words

Timberland boots are comfortable to wear, but they can get dirty and discolored very easily.

After knowing How to restore color to Timberland boots at home you can be more confident to quickly solve all stains and dirt on your shoes or keep them always looking like new at a very cheap price.

Leave a Reply

Your email address will not be published. Required fields are marked *